Replacement Printer Print Head QY6-0089 For TS5080 6020 6050 6051 TS6052 TS6080

Description

Specifications: 100% new High quality, transparent printing, fast drive, full color function Easy installation, stable characteristics, high reliability Model: QY6-0090 Color: Multicolour / Black (5 colors: PGBK large black, C blue, M red, Y yellow, BK small black) Applicable Models: For Canon TS5080 TS6020 TS6050 TS6051 TS6052 TS6080 TS5050 TS5051 TS5053 TS5055 TS5070 Package includes: Note: 1. Switch off the printer when entering the printer, otherwise the mainboard chip will burn. After loading the printhead, do not install ribbon over 10 A4 documents. Insert the ribbon so that the new needle runs in. 2. If the original printhead was defective and especially ink leaked, the mainboard may have burned. So please fix the problem with the mainboard b
Store category
Sign Up Now !
You may also like
Replacement Printer Print Head QY6-0089 For TS5080 6020 6050 6051 TS6052 TS6080
Product Description
Brand
Unbranded
Compatible Brand
For Canon
Type
Print head
Compatible Series
QY6-0089-000
Manufacturer Warranty
2 years
Compatible Model
TS5080 TS6020 TS6050 TS6051 TS6052,TS6080 TS5050 TS5051 TS5053 TS5055 TS5070
Specifications:
100% new
High quality, transparent printing, fast drive, full color function
Easy installation, stable characteristics, high reliability
Model: QY6-0090
Color: Multicolour / Black
(5 colors: PGBK large black, C blue, M red, Y yellow, BK small black)
Applicable Models: For Canon TS5080 TS6020 TS6050 TS6051 TS6052 TS6080 TS5050 TS5051 TS5053 TS5055 TS5070
Package includes:
Note:
1. Switch off the printer when entering the printer, otherwise the mainboard chip will burn.
After loading the printhead, do not install ribbon over 10 A4 documents.
Insert the ribbon so that the new needle runs in.
2. If the original printhead was defective and especially ink leaked, the mainboard may have burned.
So please fix the problem with the mainboard before replacing the printhead. In addition,
The mainboard fuse wire F1, F2 can only be replaced with the original fuse that has the same current rating and model.
Replacing an igniter that matches the higher current rating and a different model can damage both the printhead and the motherboard.
3. It is easy to cause man-made damage if a layperson blindly replaces the printhead.
4.If you are unfamiliar with the device, it is better to send the printhead to a repair station
or seek professionals to replace the nozzle in order to avoid unnecessary losses and unnecessary problems.
NOTE:
1. When the printhead is shipped, a protective fluid is applied to the printhead. Before using the printhead for the first time, wipe it before installing it. Gently wipe the copper sheet, wipe it with soft paper, and do not wipe it with cleaning fluid or an eraser.
2. During the regeneration process of the printhead, the ink is cleaned and the protective liquid is injected. If there is no protective liquid, the printhead will not be able to print because the pipeline channel is dry. If the printhead can be detected but the colors are uneven or fuzzy, you can keep printing with ink. Print a few more sheets of paper and wait until the excess protective liquid has been used up. Then you can print normally
3. If the printing effect is not clear, press the machine cleaning button to clean (the print head should only be cleaned when the ink cartridge is sufficient, otherwise it will burn out easily).
4. You do not have to clean the printhead with cleaning fluid; you can clean the printhead directly on the device. If you clean the print head with the cleaning liquid (or water) and do not drop the protective liquid, the print head will be completely blocked and unusable.
Before installing this product, please note the following:
1. After receiving the printhead, injecting water with a needle tube to check the nozzle or see if it is clogged is very redundant and dangerous behavior. If the printing effect is not clear, press the machine cleaning button (Firstly, once the print head gets into the water and the water is not dry, it will turn on. The motherboard will be blown and the print head will be blown. Second, the print heads will be sold. Our business became strict Tested and filled with protective fluid, using a needle to inject water into the printhead not only flushes away the protective fluid in the head, but it is also easy to block air in the printhead when there is no ink.
2. Be careful when installing the printhead, first turn off the power and install it in place.
3.When you plug in the plug cord, you will have no ink on it, make sure it is in good contact with the socket.
4. The steel shaft should also be clean and smooth. You can use a paper towel to use some lube to wipe off. Do not pour oil directly into the shaft. The excess oil will flow to the printhead and cause damage.
5. After all machines and circuits are correct, check the water circuit. First, check that there is enough ink left in the ink cartridge. Second, check to see if the small cleaning knife and ink suction pump are dirty.
6. The newly installed printhead contains air so it will not print normally immediately. The printer can only achieve perfect results when the air in the head is completely discharged. You can use the machine's own cleaning function for intermittent cleaning (clean twice, twice and then twice after 30 minutes). Repeated over-cleaning leads to ink build-up in the cleaning pump which ni
It only causes color mixing, ink leakage, and ink waste. Finally, you can print more images so the printhead can deflate while you work.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept
PayPal
only.
Payment must be cleared within 3 business days after placing the order .
Special request cannot be accepted after 24 hours of payment, because most of orders will be processed and dispatched in same day.
Please give us your full name, telephone number and detailed address when ordering.
We always try to pack the items as well and securely as possible so that they always arrive in good condition at the buyer
Delivery details
All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.
Insufficient information will delay the order process so pls read the invoice carefully during checkout.
Tracking numbers or shipping confirmation numbers will be emailed after they are processed. Tracking numbers are also available upon request. Contact us or leave a message through the eBay message system.
Delivery time depends on Shipping Carrier, Customs and Post Dispatch of destination and other factors
Terms of sales
Return is accepted within 30 days after the buyer's receiving the item.
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
If the item which you received is broken , Or If there is any other issue to make your dissatisfied. Please give us the opportunity to resolve problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. Please don't just leave me low DSR value, Negative/Neutral feedback or open the case by Ebay or Paypal without communication.
About us
If you have any questions,welcome to contact us by Email,We will spare no effort to meet your need.We will reply you immediately.Please check you spam mail if no response for 48 hours.
We support retail and wholesale business. Welcome to visit our store. Thanks!
Contact us
Pls Note:
If the item which you received is broken , Or If there is any other issue to make your dissatisfied. Please give us the opportunity to resolve problem. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. Please don't just leave me low DSR value, Negative/Neutral feedback or open the case by Ebay or Paypal without communication.
We will spare no effort to meet your need. Warmly welcome to contact us. Thanks!
Our customer service hours are Mon-Sat 9AM-6PM UTC+8. We are closed on weekends and all major holidays.
Feedback